Labtron LKV-A16 is a fully automated Kinematic Viscometer which controls the viscosity calculation and its method. It is made as per ASTM D445 “Standard Test Method for Kinematic Viscosity and Calculation Method for Dynamic Viscosity of Petroleum Products” National standard.
| Ambient temperature | 0 ~ 40 ºC |
| Relative humidity | 20 ~ 90 %, RH while 40 ℃ |
| Temperature controlling accuracy | ± 0.1 °C |
| Timing range | 0.0 s ~ 9999.9 s |
| Barometric | 96 ~ 103 kPa |
| Timing accuracy | ± 0.1 s |
- Automatically controls the timing, viscosity calculation, capillary viscometer washing and drying, prints the report
- Automatic self-diagnostic
- Total test controlled by microprocessor
- Highly efficient
It is used in the fields of petroleum & its products industries, research and development department.
Kinematics Viscometer
Kinematics Viscometer LKV-A11
- Ambient temperature
- (-10) °C ~ 35 °C
- Relative humidity
- ≤ 85 %
- Capillary viscometer
- 11 pieces
Low Temperature Kinematic Viscosity Tester LKV-A14
- Ambient temperature
- ≤ 30 °C
- Relative humidity
- ≤ 85 %
- Capillary viscometer
- 13 pieces
Kinematics Viscometer LKV-A10
- Ambient temperature
- 15 to 35°C
- Relative humidity
- ≤ 85%
- Capillary viscometer
- 6 capillary Pinkevitch viscometer tubes
Kinematics Viscometer LKV-A13
- Ambient temperature
- (-10) °C ~ 35 °C
- Relative humidity
- ≤ 85 %
- Capillary viscometer
- 7 pieces of Cannon-Fenske reserve-flow capillary viscometer tubes in a group