Labtron LLTT-A12 is designed with cold filter plugging point test along with proper cooling bath. Equipped as per “Test Methods for Cold Filter Plugging Point of Distillate Fuels”.
| Ambient temperature | (-10)℃ ~ 35 ℃ |
| Relative humidity | ≤ 85 % |
| Sample cup Inner diameter | 31.0 ~ 32.0 mm |
| Sample cup Wall thickness | 1.0 ~ 1.5 mm |
| Sample cup Height | 115 ~ 125 mm |
| Pumping pressure | U type differential pressure meter 1961 Pa (200 mm H<sub>2</sub>O) |
| Total power consumption | ≤ 150 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
- Relative low temperature tester
- Round glass cup with flat bottom sample cup
- Equipped with SH/T0248 “Test Methods for Cold Filter Plugging Point of Distillate Fuels
- Advance Digital display
- Integrated structure
It can be widely used in petroleum, chemical industries and environmental studies.
Low Temperature Tester
Solidifying Point Tester LLTT-A13
- Temperature controlling accuracy
- ± 0.5 ℃
- Refrigeration system
- New-type refrigeration compressor
- Cold trough
- Two holes in one trough, and same temperature
Solidifying Point Tester LLTT-A20
- Temperature controlling accuracy
- ± 0.5 °C
- Refrigeration system
- New-type refrigeration compressor
- Cold trough
- One trough with two baths, temperatures in two baths are equal
Freezing Point Tester LLTT-A11
- Freezing point range
- -54°C to 2°C
- Cold bath measurement temperature range
- -70° to 20°C
- Temperature controlling accuracy
- ±0.5°C
Multifunctional Low Temperature Tester LLTT-A16
- Refrigeration system
- New-type refrigeration compressor
- Controlling temperature of cold trough
- Cold trough I: 0 °C, ± 0.5 °C; Cold trough II: 0 °C, (-17) °C, ± 0.5 °C; Cold trough III: (-17) °C, (-34) °C, ± 0.5 °C; Cold trough IV: (-70) °C, ± 0.5 °C
- Ambient temperature
- ≤ 30 ℃