Ubbelohde Viscometer LUV-A11 has LCD display screen to show the running status of each measurement unit, precisely 6 units at the same time. It has 4 measuring positions & it can obtain intrinsic viscosity through one point method. There is no need to monitor the process after the start in this viscometer, the auto test runs continuously until the test gets completed. It accurately controls the temperature, time & flow rate of fluid tested. It meets FDA & GLP regulations on experiment data management.
| Measuring range | 0.3 - 50000 mm<sup>2</sup>/s |
| Measure position | 4 |
| Bath volume | 33 L |
| Timing accuracy | 0.01 s |
| Temperature range | 5 °C - 95 °C |
| Temperature fluctuation & uniformity | ± 0.01 °C |
| Temperature accuracy | Better than ± 0.01 °C |
| Water bath Inner dimension | 740 × 170 × 320 mm |
| Water bath Outer dimension | 810 × 270 × 500 mm |
| Heating power | 1 kW, 220 V |
| Material applicable | PET, PS, SAN, PBT, PMMA, PCT, PA, PIB, TPU, PAM, PSU, PEN, PC, PLA,CA, PVC, SB, Chitin, PAN, TP etc. |
- Display screen controls 6 units at the same time
- One point method / single concentration method
- Composed of Stainless steel material
- Automatic cleaning instead of manual cleaning
- No need to disassemble ubbelohde viscometer to avoid manmade damage
- All viscosity formulas present in the system, testing personnel can use them conveniently
- Data statistics function
- Provision of basic data for controlling quality of the products
- Can obtain intrinsic viscosity through one point method
Ubbelohde viscometer helps in obtaining kinetic viscosity, Dynamic viscosity, Relative viscosity, Viscosity ratio, DP, intrinsic viscosity & average molecular weight of chemical fluids, polymers and biological fluids.
Ubbelohde Viscometer
Automatic (high temperature) Ubbelohde Viscometer LUV-B20
- Measure position
- 1
- Oil bath medium
- Polydimethylsiloxane
- Oil bath temperature range
- 10 °C to 180 °C
Automatic Ubbelohde viscometer LUV-B10
- Measuring range
- 0.35 to 5000 mm2/s
- Measure position
- 2 (4 units measuring position at option)
- Bath volume
- 12 L
Rotational Viscometers
Viscometer LVM-A42
- Rotational speed range
- 0.3 to 100 rpm
- Standard Rotor
- Rotor R2 to R7 (6, Standard), R1 (Apolegamy)
- Viscosity measurement range
- Rotor R2 to R7:200 to 26 M (mPa.s)
Viscometer LVM-A40
- Viscosity Range
- 3 to 1600000 M (mPa.s)
- Rotation speed range
- 0.3/0.6/1.5/3/6/10/12/15/20/25/30/40/50/60/70/80/90/100 Total 18 rpm
- Spindles
- 18# rotor：3 to 10 K； 7 ml 25# rotor：480 to 1.6 M； 9 ml 31# rotor：30 to 100 K； 10.5 ml 34# rotor：60 to 200 K； 11 ml
Viscometer LVM-B11
- Measuring range
- 0.1 to 2,000,000 mPa.s
- Rotating speed
- 0.3/0.6/1.5/3/6/12/30/60 (r/min)
- Rotor
- 1-4 number rotors, Measuring viscosity lower than 10 needs to be equipped with the 0 number rotar
Viscometer LVM-A21
- Viscosity Range
- RV: 100 to 13000000 mPa.s
- Rotation speed range
- 0.3 to 100 rpm (stepless)
- Spindles
- RV: (2#, 3#, 4#, 5#, 6#, 7#, 6 Spindles) (0#, 1# are optional)
Cone Viscometers
Cone Plate Viscometer LCPV-A10
- Accuracy
- ± 2 % (F.S)
- Temperature
- -1℃ to 150℃ (± 0.1℃)
- Spindle Details
- Spindle No CAP-01 CAP-04 Shear Rate 13.3 N 3.3 N Sample Volume 67µL 134µL LCPV-A10 (400rpm) 47-469 300-3,750 LCPV-A10 (750rpm) 25-250 200-2,000 LCPV-A10 (900rpm) 20-208 170-1,667