Radio Frequency Identification Water Purification System LRFW-C10 a desktop type, microcomputer controlled, water purification device consist of pre-treatment system, RO system, ultrapure water system conveying unit, control system ,and a RFID Radio Frequency Identification Chip to check on the quality of water in real time. The user-friendly touch screen feature to display date, conductivity, resistivity, filter lifespan etc. information.
It offers water purification rate of ≥ 10 L/ h, with Ultrapure Water Flow Rate 2 L/ min. The pre-treatment process filters out impurities in the raw water, such as tiny particles, suspended solids and colloid and reduce inlet water turbidity, prevents fouling of RO membrane. RO membrane, effectively removes all kinds of salt ions, organics, bacteria and virus in water.
Membrane pure water pump to achieve intake ultrapure water speed up to 1 to 1.5 L/ min. Ultra-purification system consist of ion exchange resin and special flow design, effectively remove the trace ions in water; guarantee the stability of water quality. The 0.22 µm membrane or hollowed fiber membrane filter, filter out pollutants larger than 0.22 μm, making the particles content <1/ml. The 254 nm UV lamp removes the bacteria in the system, and 185 nm UV lamp used to segment or ionize long chain, in preparation for the subsequent deionization and organic absorption.
| Feed Water | Tap Water , TDS ≤ 400 ppm, Water Temperature: 5 to 40°C |
| Water Production Rate | ≥ 10 L/ h, Ultrapure Water Flow Rate 2 L/ min |
| Water Quality (Two Stage) | Ultrapure water: Resistivity: 18.25 MΩ.cm at 25°C conforms to ASTM CAP NCCLS |
| Free Chlorine | < 3 ppm |
| TOC | < 5 ppb |
| Microorganisms | < 1 cfu/ ml |
| Pyrogens | < 0.025 EU/ ml |
| Particles | < 1/ ml (> 0.22 µm) |
| Absorbance | < 0.001 (254 nm, 1 cm optical distance) |
| Reactive Silica | < 0.01 ppm |
| Heavy Metal | < 0.01 ppm |
| Ambient Temperature | 5 to 40°C |
| Relative Humidity | 10 to 80 % |
| Display | 5 inch Touch screen display to view test parameters |
| Power Consumption | 150 W |
| Power Supply | 220 V, 60 Hz |
| Dimension | 345 × 537 × 540 mm Main body |
| Weight | 36 kg |
- Touch screen feature to display date, conductivity, resistivity, filter lifespan etc. information
- Water Purification System is unique and easy-to-install pre-filtration pack system
- Built-in manual water auto-cycling program, to keep the water quality of ultrapure water
- Automatic Water Purification System: automatically stops the system, cut off power and water when tank is full
- High capacity Molecular Ultra Purification Polishing Resin Cartridge
- On-line resistivity, conductivity, temperature monitoring
- Built-in RO membrane, automatic flush procedures
- Manual RO membrane cleaning button
- Incorporated with both 185 nm and 254 nm UV sterilizers
- 30 L sterile pure water tank ensures the quality of pure water
- It complies international standards like CE, and ISO quality system
Radio Frequency Water Purification System is used in Molecular biology and life sciences, Animal cells and plant cell culture, Tissue culture, IVF, Electrophoresis, gel analysis, etc. for sample preparation, medium preparation, molecule analysis etc.
Radio Frequency Identification Water Purification System
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
Radio Frequency Identification Water Purification System LRFW-B13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Double Pass RO system
- Configuration
- Floor standing
Radio Frequency Identification Water Purification System LRFW-A11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Single Pass RO system
- Configuration
- Benchtop
Radio Frequency Identification Water Purification System LRFW-A13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Single Pass RO system
- Configuration
- Floor Standing
Radio Frequency Identification Water Purification System LRFW-B11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
Type I and Type III Water Purification System
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
Type I and Type III RO Water Purification System LOTW-A11
- Output of Pure water
- ≥ 20 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-B11
- Output of Pure water
- ≥ 20 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-A10
- Output of Pure water
- ≥ 10 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-B20
- Water production rate
- ≥ 30 L/h
- Water intake rate
- 1.5 to 1.8 L/min
- Temperature
- 5 to 40°C
Type II Water Purification System
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
Type II Water Purification System LTWP-A14
- Output of Pure water
- ≥ 50 L / hr.
- Process
- Single Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-A10
- Output of Pure water
- ≥ 10 L / hr.
- Process
- Single Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-A13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Single Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-B14
- Output of Pure water
- ≥ 50 L / hr.
- Process
- Double Pass RO system
- Water Type
- Type II
Type III Water Purification System
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
Type III Water Purification System LHWP-B11
- Output of Pure water
- ≥ 20 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
Type III Water Purification System LHWP-A12
- Output of Pure water
- ≥ 30 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
Type III Water Purification System LHWP-A13
- Output of Pure water
- ≥ 40 L / hr.
- Water Type
- Type III
- Configuration
- Floor Standing
Type III Water Purification System LHWP-A10
- Output of Pure water
- ≥ 10 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
UV Water Purification System
UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption
UV Water Purification System LUVW-B11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
UV Water Purification System LUVW-A13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Single Pass RO system
- Configuration
- Floor Standing
UV Water Purification System LUVW-A12
- Output of Pure water
- ≥ 30 L / hr.
- Process
- Single Pass RO system
- Configuration
- Benchtop
UV Water Purification System LUVW-A14
- Output of Pure water
- ≥ 50 L / hr.
- Process
- Single Pass RO system
- Configuration
- Floor Standing