Soil moisture meter TSMM-A10 with compact, portable design finds application in moisture measurement of soil & cement, sand, powders. Equipped with LCD display, this soil moisture meter saves time, the cost incurred in by monitoring dryness of the soil & helps to prevent deterioration occurring from moisture during its storage. This moisture meter goes automatically off after 5 minutes of last operation, also it can be switched off manually.
| Measurement range | 0 to 80 % |
| Resolution | 0.1 |
| Accuracy | ± 2 % n (non-saturation condition) |
| Needle | 280 mm |
| Display | Digital LCD 1.69×1.04 inches |
| Temperature range | 0 to 60°C |
| Humidity range | 5 to 90 % RH |
| Battery dimension | 140 × 60 × 22 mm |
| Net weight | 210 g (excluding batteries) |
| Gross weight | 700 g |
| Power supply | 4 1.5 AAA size (UM4 ) |
- Portable nature
- Back light digital LCD display
- Automatic temperature compensation
- Instant moisture measurement readings
- Alarm alert for low battery level
- Auto power off function
- Data hold function
- User-friendly appearance
- Easy to use
Used for best applications in research & development, agriculture, horticulture, construction & other industry to measure moisture of soil, cement, sand, powders.
Soil Testing Instruments
Soil nutrient tester TSNA-A11
- Measuring range
- 0.001 to 9999
- Stability
- A (absorbency of light)
- Linearity error
Soil Salinity tester TSST-A10
- Salinity Measurement range
- 0.00 to 19.99 ms/cm
- Measuring accuracy
- EC ± 2% full scale
- Temperature Measurement range
- -5 to 50°C
Soil water hardness meter TSHM-A10
- Maximum load
- 100 kg ( kg and N can be switched automatically)
- Resolution
- 0.01 g
- Accuracy
- ± 0.5 %
Soil moisture meter TSMM-A12
- Measurement range
- 0 to 60 %
- Resolution
- 0.1
- Accuracy
- ± 5 % n (non-saturation condition)
Paper Testing Instruments
Paper and cardboard thickness meter TP-E21
- Measuring range
- 0 to 20 mm
- Accuracy
- 0.01 mm
- Gauge
- Analogue gauge display
Carton compression tester TP-I11
- Measuring range
- 1 to 50 kN
- Indication error
- < ± 1%
- Platen Size
- 800×800 mm/ 1000×1000 mm/ 1200×1200 mm/ 1500×1500 mm (customized)
Mullen burst tester TP-K10
- Measurement range
- 0 to 5600 kPa
- Accuracy
- ± 0.5 % F.S.
- Compression speed
- 170 ± 15 ml/min
Plastic Testing Instruments
Melt flow Indexer TMFI-A10
- Measuring range
- 0.01 to 600.00 g/ 10 min (MFR), 0.01 to 600.00 cm/ 10 min (MVR), 0.001 to 9.999 g/cm (melt density)
- Measuring rate
- 0.001 S
- Temperature range
- 50 to 400°C
Heat sealer THS-A10
- Seal temperature
- Room temperature -250°C
- Control accuracy
- ± 0.2°C
- Dwell time
- 0.1 S to 999.9 S
Vicat softening temperature & HDT machine TVHT-A10
- Operating temperature
- Ambient temperature to 300°C
- Heating rate
- 50°C/ h (5 ± 0.5°C/ 6 min) , 120°C/ h (12 ± 1°C/ 6 min)
- Maximum temp. error with heating speed
- ± 5°C under 50°C/ h, ± 1°C under 120°C/ h
Charpy/ Izod Impact Tester TCI-A10
- Impact Speed & Energy (charpy)
- 2.9 m/s for 1J, 2J, 4J, 5J & 3.8 m/s for 7.5J, 15J, 25J
- Impact energy (Izod)
- 3.5 m/s for 1J, 2J, 4J, 5J, 7.5J, 15J, 25J
- Resolution of impact energy
- 0.001 J
Rubber Testing Instruments
Three roll mill machine TRMM-A10
- Mixed capacity
- 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg
- Temperature range
- RT to 300°C
- Temperature control system
- PID control
DIN abrasion tester TDAT-A10
- Test arm weight
- 2.5 N
- Additional Loads
- 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,
- Idler
- 150 mm
No rotor rheometer TNRR-A10
- Temperature tester
- Room temperature to 200°C
- Temperature display resolution
- 0.1°C
- Temperature control accuracy
- ≤ ± 0.3°C
Rubber Low Temperature Brittleness Tester TRBT-A11
- Temperature control range
- Room temperature to -70 ℃ (room temperature ≤ 25 ℃）
- Temperature accuracy
- ± 0.3 ℃
- Impact speed
- 0℃ to -30℃ around 2.5 ℃/min -30℃ to -40℃ around 2.5 ℃/min -40℃ to -70℃ around 2.0 ℃/min
NDT Testing Instruments
Portable Vibration Calibrator LPVC-A10
- Frequency (continually adjustable)
- 10 Hz to1280 Hz + 0.01 %
- Amplitude acceleration ( at 30m/s2 pk )
- 40 Hz to 320 Hz + 0.3 dB + 1 digit
- Amplitude velocity ( at 25mm / sec pk )
- 40 Hz to 320 Hz + 0.5dB +1 digit
Rockwell hardness meter TRHM-A10
- Preliminary test force
- 98 N
- Total test force
- 588, 980, 1471 N
- Total test force dwell time
- 0 to 30 S
Rockwell hardness meter TRHM-A11
- Preliminary test force
- 98 N
- Total test force
- 588, 980, 1471 N
- Total test force dwell time
- 1 to 30 S
Rockwell hardness meter (motorized type) TRHM-B10
- Preliminary test force
- 98 N
- Total test force
- 588, 980, 1471 N
- Brinell hardness test
- 306, 613, 1839 N