Water Purification System LWPS-C11 is top choice of high flux ultrapure water system from tap to ultrapure water, integrating pretreatment, RO and terminal filter into one. Its output ranges up to 90 liters/hour and offers flow rate up to 2 liters/minute (when tank is full). Features with tap water inlet, it can produce second stage RO water and EDI module, center EDI ultrapure water system. The 2nd stage RO water’s conductivity can stay 1 to 5 µs/cm, and the ultrapure water’s resistivity is more absolutely to 18.2 MΩ.cm. It completely meets the highest grades and offers ASTM standards. Designed with 7.0 inch touch LCD display, to detect the quality of 3 way water sensor, 2 way flow sensor ultrapure water. Equipped with Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF. It is auto self-flushing of RO membrane function, extend RO membrane life.
| Output 2nd stage RO water | 90 liters/hour |
| Output ultrapure water | Up to 2 liters/minute (when tank is full) |
| Ultrapure Water Quality | Resistivity (25°C) 18.2 M Ω cm<br/> TOC: < 3ppb<br/> Bacteria: <0.1 cfu/ml<br/> Particle (>0.2 µm): <1/ml<br/> Endotoxin: <0.001EU/ml<br/> RNases: <1pg/ml<br/> DNases: <5pg/ml |
| EDI | Resistivity >10.2 M Ω cm<br/> TOC: < 30ppb<br/> Silicone rejection rate: >99.9 % |
| RO Water Quality | Conductivity 1st stage RO water: Feed water Conductivity ×5 %<br/> Conductivity 2nd stage RO water: 1 to 5 µs/cm |
| Feed water requirements | Tap water, Temperature 5 to 45°C, Pressure 1.0 to 4.0 Kgf/cm2 |
| Dimension | 610 × 585 × 1580 mm |
| Power Consumption | 480 W |
| Power Supply | AC110 to 240 V, 50/60 Hz |
| Weight | about 75 kg |
| Standard configuration | Main body (Including 1 set of cartridge) +20 liters Pressure Tank and 20 liters pressure tank |
- Water Purification is unique and easy-to-install prefiltration pack system
- Integrate with EDI module, without softener, chemical regeneration and replacing any DI cartridge
- Self-maintenance of the reverse osmosis membrane
- The system recirculates water when the system is not in use in order to maintain water quality
- Built in 20 liters Pressure Tank and 20 liters plastic pressure water tank
- Designed with graphic display clearly indicates all parameters
- 3 doors and easy to replacing cartridge design, convenient to maintain system and replace cartridges
- RO module with DOWs membrane, ensure long life, stable operation and high desalinization rate
- Designed with multiple alarm function
- Offers data storage and RS 232/USB communication port
- Equipped with range of filters and cartridges are available for the system to match your water requirements of bacteria-free, pyrogen-free or nuclease-free
- Ultrafiltration module, effectively eliminate endotoxin and suitable for precise cell cultivating and IVF
- Easy to maintain and operate
Water Purification System is used in Molecular biology and life sciences, Animal cells and plant cell culture, Tissue culture, IVF, Electrophoresis, gel analysis, medium preparation etc. across Healthcare, Food & Beverage and Biochemistry microanalysis etc.
Water Purification System (Feed-specific)
Water Purification System LWPS-C10
- Output 2nd stage RO water
- 90 liters/hour
- Output ultrapure water
- Up to 2 liters/minute (when tank is full)
- Ultrapure Water Quality
- Resistivity (25°C) 18.2 M Ω cm TOC: < 3ppb Bacteria: 0.2 µm):
Water Purification System LWPS-A11
- Water quality
- Two stage(Type III and type I)
- Feed water
- Tap waterTDS≤400ppm Water temperature: 5-40℃ Type 3 water ≥10L/h
- Conectivity
Water Purification System LWPS-A10
- Water quality
- One stage (Type I)
- Feed water
- RO water /Distilled water Water temperature: 5 ~ 40℃
- Resistivity
- 18.25 MΩ.cm @ 25 ℃
Type I and Type III Water Purification System
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
Type I and Type III RO Water Purification System LOTW-B12
- Output of Pure water
- ≥ 30 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-A10
- Output of Pure water
- ≥ 10 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-A11
- Output of Pure water
- ≥ 20 L / hr.
- Water Type
- Type I and Type III
- Water Tank capacity
- 30 L
Type I and Type III RO Water Purification System LOTW-B20
- Water production rate
- ≥ 30 L/h
- Water intake rate
- 1.5 to 1.8 L/min
- Temperature
- 5 to 40°C
Type II Water Purification System
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
Type II Water Purification System LTWP-B13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Double Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-B10
- Output of Pure water
- ≥ 10 L / hr.
- Process
- Double Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-A11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Single Pass RO system
- Water Type
- Type II
Type II Water Purification System LTWP-A12
- Output of Pure water
- ≥ 30 L / hr.
- Process
- Single Pass RO system
- Water Type
- Type II
Type III Water Purification System
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
Type III Water Purification System LHWP-A13
- Output of Pure water
- ≥ 40 L / hr.
- Water Type
- Type III
- Configuration
- Floor Standing
Type III Water Purification System LHWP-A10
- Output of Pure water
- ≥ 10 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
Type III Water Purification System LHWP-B14
- Output of Pure water
- ≥ 50 L / hr.
- Water Type
- Type III
- Configuration
- Floor Standing
Type III Water Purification System LHWP-B11
- Output of Pure water
- ≥ 20 L / hr.
- Water Type
- Type III
- Configuration
- Benchtop
Radio Frequency Identification Water Purification System
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
Radio Frequency Identification Water Purification System LRFW-B11
- Output of Pure water
- ≥ 20 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
Radio Frequency Identification Water Purification System LRFW-B12
- Output of Pure water
- ≥ 30 L / hr.
- Process
- Double Pass RO system
- Configuration
- Benchtop
Radio Frequency Identification Water Purification System LRFW-B13
- Output of Pure water
- ≥ 40 L / hr.
- Process
- Double Pass RO system
- Configuration
- Floor standing
Radio Frequency Identification Water Purification System LRFW-A10
- Output of Pure water
- ≥ 10 L / hr.
- Process
- Single Pass RO system
- Configuration
- Benchtop