Portable Multiple Gas Detector LPMG-A10 with compact handheld design, simultaneously detects contents of four different gases namely H2S, CO, O2, CH4. Large easy to read lattice TFT display shows all real time detection values of gases. Used in field detection of multiple gases for quality testing and research purpose.
| Sampling Method | Diffusion |
| Working conditions | <table cellspacing=0 border=1> <tr> <td style=min-width:50px>Temperature </td> <td style=min-width:50px>-20 to 50°C</td> </tr> <tr> <td style=min-width:50px>Pressure </td> <td style=min-width:50px>0.9 to 1.1 (standard atmospheric pressure) </td> </tr> <tr> <td style=min-width:50px>Humidity </td> <td style=min-width:50px>10 to 95 % RH (no dew condensation)</td> </tr> </table> |
| Explosion proof grade | Exia II CT3 |
| Protection grade | IP65 |
| Charging time | 4 to 6 h |
| Working time of battery | > 8 h (non-alarm state) |
| Type of battery | Lithium battery |
| Length of Pump pipe | < 1 meter |
| Measurement principle of sensor | Electrochemical, catalytic combustion |
| Power supply | Lithium battery (DC 3.7V, 2400mAh) |
| Dimension (host machine) | 85 × 153 × 50 mm |
| Dimension (hand shake of gas pump) | 45 × 239 × 28 mm |
| Weight (host machine) | About 300 g |
| Weight (hand shake of gas pump) | About 80 g |
| HS Code | 9027100090 |
- Portable, lightweight design
- Save power by adjusting back light brightness
- Electrochemical, catalytic combustion, imported sensor
- Can set Upper/Lower alarm limits for better operations
- Alarm with LED buzzer, vibration alerts when gas spikes are detected
- Automatic battery detection (under-voltage indication)
- Stores test memory data, alarm data
Used for simultaneous field detection of H2S, CO, O2, CH4 across mining, environmental industry, waste management plants, petroleum testing units, gas and chemical industry.
Gas Detectors
Portable SO2Gas Detector LPSG-A20
- Gas detected
- Sulfur dioxide SO2
- Detection principle
- Electrochemistry
- Sampling method
- Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection.
Portable Nitrogen N2 Gas Detector LNGD-A10
- Gas Detected
- Nitrogen N2
- Detection principle
- Electrochemical principles
- Measurement Range
- 0 to 100 %.Vol
Portable 10 in 1 Multi Gas Detector LMGD-A10
- Gas Detected
- O2 CH4 CO2 VOC CO H2S SO2 CL2 NO2 NH3
- Detection principle
- Electrochemical principle (O2 CO H2S SO2 CL2 NO2 NH3) Infrared principle (CH4 CO) Photoionization principles (VOC)
- Measurement Range
- O2: 0-30% VOL, CH4: 0-50000 PPM, CO2:0-50000 PPM VOC:0-2000 PPM, CO:0-999 PPM, H2S: 0-200 PPM SO2: 0-25 PPM, CL2: 0-50 PPM, NO2: 0-100 PPM, NH3:0-100 PPM
Portable NO2 Gas Detector LPSG-A21
- Gas detected
- NO2
- Detection principle
- Electrochemistry
- Sampling method
- Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection.
Digital Differential Pressure Meter
Digital Differential Pressure Meter LDPM-A20
- Measuring range
- ± 500 Pa
- Repeatability
- ± 0.2 % FS
- Resolution
- 0.1 Pa
Digital Differential Pressure Meter LDPM-A10
- Measuring range
- 0 ∼ 125 Pa
- Accuracy
- 0 ± 0.2 Pa (liner error) ± 1 %
- Operating temperature range
- 0 °C ∼ 50 °C
Handheld Ozone Tester
Handheld Ozone Tester LHOT-A10
- Measurement range
- 0 ppm ∼ 5 ppm
- Resolution
- 0.001 ppm ( 0 ppm ∼ 5 ppm )
- Temperature range
- ˗ 40 °C ∼ 120 °C
Online Ozone Meter
Online Ozone Meter LOOM-A10
- Ozone measurement range
- 0 ppm ∼ 5 ppm, 0 ppm ∼ 100 ppm, 0 ppm ∼ 300 ppm, 0 ppm ∼ 600 ppm ( Optional )
- Flow rate
- 1.5 L/min
- Accuracy
- 0.01 ppm or 3 % of reading
UV-Absorption Ozone Meter
UV Absorption Ozone Meter LUOM-A10
- Ozone measurement range
- 0 ppm ∼ 100 ppm/ 0 ppm ∼ 1000 ppm
- Flow rate
- 1 L/min
- Accuracy
- 0.01 ppm